All Series: Linkage

1970 Oldsmobile Toronado Base, Eng CD UV, Automatic TransSECTION Linkage

Consists of a center cross link connected between pitman arm and idler arm. Idler arm is bracketed to right side frame member. Left and right tie rods are connected from center cross link to steering knuckles. Tie rods have sleeve adjustment for toe-in.

NOTE: If idler arm bushings are worn, complete idler arm assembly must be replaced. When spindle connecting rod end is replaced all new parts must be used.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.