SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2024FRONTIER SL, RWDREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROL SYSTEM (DTC/CIRCUIT DIAGNOSIS) (5 OF 6)DTC/CIRCUIT DIAGNOSISDTC P1236: THROTTLE CONTROL MOTORCOMPONENT INSPECTION (THROTTLE POSITION SENSOR)
2024 Nissan-Datsun Frontier SL, RWD

Component Inspection (Throttle Position Sensor)

2024 Nissan-Datsun Frontier SL, RWDSECTION Component Inspection (Throttle Position Sensor)
  1. CHECK THROTTLE POSITION SENSOR 
    1. Turn ignition switch OFF.
    2. Reconnect all harness connectors disconnected.
    3. Perform Description .
    4. Turn ignition switch ON.
    5. Set selector lever to D position.
    6. Check the voltage between ECM harness connector terminals under the following conditions.
      ECM Condition Voltage
      Connector Terminal
      F79 103 (TP sensor 1) 100 Accelerator pedal Fully released More than 0.36 V
      Fully depressed Less than 4.75 V
      114 (TP sensor 2) Fully released Less than 4.75 V
      Fully depressed More than 0.36 V

    Is the inspection result normal?

    >>

    INSPECTION END

    >>

    GO TO 2.

  2. REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR 
    1. Replace malfunctioning electric throttle control actuator.
    2. Proceed to Description .

    >>

    INSPECTION END

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.