CONSULT Function (BCM - COMMON ITEM)

2024 Nissan-Datsun Frontier SL, RWDSECTION CONSULT Function (BCM - COMMON ITEM)

APPLICATION ITEM 

CONSULT performs the following functions via CAN communication with BCM:

Direct Diagnostic Mode Description
ECU Identification The BCM part number is displayed.
Self Diagnostic Result The BCM self diagnostic results are displayed.
Data Monitor The BCM input/output data is displayed in real time.
Active Test The BCM activates outputs to test components.
Work support The settings for BCM functions can be changed.
Configuration
  • The vehicle specification can be read and saved.
  • The vehicle specification can be written when replacing BCM.
CAN Diag Support Mntr The result of transmit/receive diagnosis of CAN communication is displayed.

SYSTEM APPLICATION 

BCM can perform the following functions:

System Sub System Direct Diagnostic Mode
ECU Identification Self Diagnostic Result Data Monitor Active Test Work support Configuration CAN Diag Support Mntr
Door lock DOOR LOCK x x x x x    
Rear window defogger REAR DEFOGGER x x x x x    
Warning chime BUZZER x x x x      
Interior room lamp timer INT LAMP x x x x x    
Exterior lamp HEAD LAMP x x x x x    
Wiper and washer WIPER x x x x x    
Turn signal and hazard warning lamps FLASHER x x x x x    
Air conditioner AIR CONDITIONER x x x        
Combination switch COMB SW x x x        
BCM BCM x x     x x x
Immobilizer IMMU x x x x      
Interior room lamp battery saver BATTERY SAVER x x x x      
Vehicle security system THEFT ALM x x x x x    
RAP system RETAINED PWR x x x        
Signal buffer system SIGNAL BUFFER x x x x      
Intelligent Key system INTELLIGENT KEY x x x x x    
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.