Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2024FRONTIER SL, RWDREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSPOWER WINDOW CONTROL SYSTEMBASIC INSPECTIONCHECK ANTI-PINCH FUNCTIONWORK PROCEDURE
2024 Nissan-Datsun Frontier SL, RWD
Work Procedure
2024 Nissan-Datsun Frontier SL, RWDSECTION Work Procedure
- CHECK ANTI-PINCH FUNCTION
-
- Fully open the door window.
- Place a piece of wood near fully closed position.
- Close door glass completely with AUTO-UP.
- Check the following conditions:
- Check that glass lowers for approximately 5.91 in. (150 mm) without pinching piece of wood and stops.
- Check that glass does not rise when operating the main power window and door lock/unlock switch while lowering.CAUTION:
- Perform initial setting when AUTO-UP operation or anti-pinch function does not operate normally.
- Check that AUTO-UP operates before inspection when system initialization is performed.
- Do not check with hands and other body parts because they may be pinched. Do not get pinched.
>>
Inspection End.
-
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.