Menu Displayed by Pressing Each Switch

2024 Nissan-Datsun Frontier SL, RWDSECTION Menu Displayed by Pressing Each Switch

ICC SYSTEM DISPLAY (ON THE INFORMATION DISPLAY) 

GNSDB135841Courtesy of NISSAN NORTH AMERICA, INC.
No. Display item Description
SYMBOL ICC system ON indicator (gray) Indicates that the MAIN switch is ON
ICC system warning (orange) Indicates that there is a malfunction in the ICC system
ICC system SET indicator (green) Indicates that the cruising speed is set
SYMBOL Set vehicle speed indicator
  • Indicates the set vehicle speed
  • Indicates 30 km/h (20 MPH) when setting less than 30 km/h (20 MPH)
SYMBOL Set distance indicator Indicates the selected distance between vehicles set with the DISTANCE switch

SYSTEM CONTROL CONDITION DISPLAY 

Quickly push (less than 1.5 seconds) and release the ICC MAIN switch.

Condition Display on information display
Standby mode ICC system ON indicator: Gray/Set vehicle speed indicator: -
GNSDB135957Courtesy of NISSAN NORTH AMERICA, INC.
Control mode Without a vehicle ahead Set vehicle distance (Long) ICC system SET indicator: Green/Set vehicle speed indicator: Green
GNSDB134784Courtesy of NISSAN NORTH AMERICA, INC.
White
GNSDB136350Courtesy of NISSAN NORTH AMERICA, INC.
Set vehicle distance (Middle) ICC system SET indicator: Green/Set vehicle speed indicator: Green
GNSDB134784Courtesy of NISSAN NORTH AMERICA, INC.
White
GNSDB136195Courtesy of NISSAN NORTH AMERICA, INC.
Set vehicle distance (Short) ICC system SET indicator: Green/Set vehicle speed indicator: Green
GNSDB134784Courtesy of NISSAN NORTH AMERICA, INC.
White
GNSDB135567Courtesy of NISSAN NORTH AMERICA, INC.
When the vehicle speed exceeds the set speed ICC system SET indicator: Green/Set vehicle speed indicator: Green (Blink)
GNSDB134784Courtesy of NISSAN NORTH AMERICA, INC.
Control mode With a vehicle ahead Set vehicle distance (Long) ICC system SET indicator: Green/Set vehicle speed indicator: Green
GNSDB134818Courtesy of NISSAN NORTH AMERICA, INC.
Green
GNSDB136350Courtesy of NISSAN NORTH AMERICA, INC.
Set vehicle distance (Middle) ICC system SET indicator: Green/Set vehicle speed indicator: Green
GNSDB134818Courtesy of NISSAN NORTH AMERICA, INC.
Green
GNSDB136195Courtesy of NISSAN NORTH AMERICA, INC.
Set vehicle distance (Short) ICC system SET indicator: Green/Set vehicle speed indicator: Green
GNSDB134818Courtesy of NISSAN NORTH AMERICA, INC.
Green
GNSDB135567Courtesy of NISSAN NORTH AMERICA, INC.
When the vehicle speed exceeds the set speed ICC system SET indicator: Green/Set vehicle speed indicator: Green (Blink)
GNSDB134818Courtesy of NISSAN NORTH AMERICA, INC.

APPROACH WARNING DISPLAY 

If own vehicle comes closer to a vehicle ahead due to rapid deceleration of that vehicle or if another vehicle cuts in, the system warns the driver with the chime. Decelerate by depressing the brake pedal to maintain a safe vehicle distance if:

  • The chime sounds.

The warning chime may not sound in some cases when there is a short distance between vehicles. Some examples are:

  • When the vehicles are traveling at the same speed and the distance between vehicles is not changing.
  • When the vehicle ahead is traveling faster and the distance between vehicles is increasing.
  • When a vehicle cuts in near own vehicle.

The warning chime will not sound when own vehicle approaches vehicles that are parked or moving slowly. The warning chime will not sound when the accelerator pedal is depressed, overriding the system. The approach warning chime may sound and the system display may blink when the distance sensor detects some reflectors which are fitted on vehicles in other lanes or on the side of the road. This may cause the ICC system to decelerate or accelerate the vehicle. The distance sensor may detect these objects when the vehicle is driven on winding roads, hilly roads or when entering or exiting a curve. The distance sensor may also detect reflectors on narrow roads or in road construction zones. In these cases, driver will have to manually control the proper distance ahead of own vehicle. Also, the sensor sensitivity can be affected by vehicle operation (steering maneuver or driving position in the lane) or traffic or vehicle condition (for example, if a vehicle is being driven with some damage).

WARNING LAMP AND AUTOMATIC CANCELLATION DISPLAY 

Condition Description Display on information display
When the ICC system is in operation, the following conditions are met;
  • When the VDC is turned OFF
  • When the VDC operates
  • When a vehicle ahead is not detected below the speed of 24 km/h (15 MPH)
  • When the system judges the vehicle is at standstill
  • When the selector lever is not in "D" position or manual mode
  • When the parking brake is applied
  • When a wheel slips
  • When the radar signal is temporarily interrupted
  • The control is automatically canceled
  • A chime sounds
NOTE: SYMBOL When the conditions listed are no longer present, turn the ICC system OFF using the MAIN switch. Turn the ICC system back on to use the ICC system.
-
When the SET- switch is pushed under the following conditions;
  • When the VDC is OFF (To use the ICC system, turn ON the VDC system. Push the MAIN switch to turn OFF the ICC system and reset the MAIN switch by pushing the ICC switch again.)
  • When the VDC is operating
  • When a wheel is slipping
  • The ICC system cannot be set
  • A chime sounds
  • A message pops up
Currently not available
When the front grille near the distance sensor is dirty, making it impossible to detect a vehicle ahead.
  • The control is automatically canceled
  • A chime sounds
  • A message pops up
NOTE: SYMBOL Park the vehicle in a safe place, turn the engine OFF. Clean the front grille near the distance sensor and then perform the settings again.
Forward Driving Aids temporarily disabled/Front Sensor blocked/See Owner's Manual
When driving on roads with limited road structures or buildings (for example, long bridges, deserts, snow fields, driving next to long walls).
NOTE: SYMBOL When the conditions listed above are no longer present, turn the system OFF using the MAIN switch. Turn the ICC system back on to use the system.
When the SET- switch is pushed under the following conditions;
  • When the VDC operates
  • When a wheel slips
  • The ICC system cannot be set
  • A chime sounds
  • A message pops up
Not Available/Poor Road Conditions
When the ICC system is malfunctioning.
  • The control is automatically canceled
  • A chime sounds
  • The ICC system warning indicates
  • A message pops up
NOTE: SYMBOL
  • The system will be in a standby, after the control is automatically canceled.
  • A chime sounds when the control is automatically canceled, except when brake pedal is depressed or when CANCEL switch is pressed.
ICC system warning: Orange
GNSDB134738Courtesy of NISSAN NORTH AMERICA, INC.
Malfunction
NOTE: SYMBOL When the ICC system is automatically canceled, the cancellation condition can be displayed on "Work support" of CONSULT (ICC/ADAS 2).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.