Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSNISSAN-DATSUN2024FRONTIER SL, RWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASCRUISE CONTROL SYSTEM (ICC)SYSTEM DESCRIPTIONOPERATIONCONVENTIONAL (FIXED SPEED) CRUISE CONTROL MODE FUNCTIONMENU DISPLAYED BY PRESSING EACH SWITCH

2024 Nissan-Datsun Frontier SL, RWD

Menu Displayed by Pressing Each Switch

2024 Nissan-Datsun Frontier SL, RWDSECTION Menu Displayed by Pressing Each Switch

ICC SYSTEM DISPLAY (ON THE INFORMATION DISPLAY)

Courtesy of NISSAN NORTH AMERICA, INC.

No.	Description	Function
	Cruise control warning (Orange)	Indicates that there is a malfunction in the ICC system
	Cruise control ON indicator (gray)	Indicates that the ICC switch is ON
	Cruise control SET indicator (green)	Indicates that the cruising speed is set
	Set vehicle speed indicator	Indicates the set vehicle speed

SYSTEM CONTROL CONDITION DISPLAY

Push and hold the ICC MAIN switch for longer than approximately 1.5 seconds. This mode will be in a standby state for setting.

Condition	Display on information display
Standby mode	Cruise control ON indicator : Gray/Set vehicle speed indicator : - Courtesy of NISSAN NORTH AMERICA, INC.
Control mode	Cruise control SET indicator : Green/Set vehicle speed indicator : Green Courtesy of NISSAN NORTH AMERICA, INC.

WARNING AND AUTOMATIC CANCELLATION DISPLAY

Condition	Description	Display on information display
When the ICC system is in operation, the following conditions are met; When the vehicle slows down more than 13 km/h (8 MPH) below the set speed When the selector lever is not in the "D" position or manual mode When the parking brakes are applied When VDC (including the TCS) operates When a wheel slips	The control is automatically canceled A chime sounds NOTE: The system will be in a standby, after the control is automatically canceled A chime sounds when the control is automatically canceled, except when brake pedal is depressed or when CANCEL switch is pressed	Cruise control ON indicator : Gray/Set vehicle speed indicator : - Courtesy of NISSAN NORTH AMERICA, INC.
When the ICC system is malfunctioning	The control is automatically canceled A chime sounds NOTE: Turn the engine OFF and restart engine. If there is no malfunction, it is possible to set the system	Cruise control warning (Orange) Courtesy of NISSAN NORTH AMERICA, INC.

NOTE:

When the ICC system is automatically canceled, the cancellation condition can be displayed on "Work support" of CONSULT (ICC/ADAS 2).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.