Quick Lookups: Fluids

2024 Nissan-Datsun Frontier SL, RWDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.30 OZS. 0.15 L PAG Oil Type ND-OIL12 or equivalent S
Air Cond Refrigerant 1.40 LBS. 0.63 KG HFO- 1234yf (R-1234yf) S
Automatic Transmission Fluid 8.50 QTS. 8.04 L Genuine NISSAN Automatic Transmission Fluid Matic P S
Brake Fluid N/A N/A Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 S
Differential Gear Oil Front 0.75 QTS. 0.7 L Genuine NISSAN Differential Oil Hypoid Super GL-5, SAE 80W-90 conventional oil (non-synthetic) oil S
Differential Gear Oil Rear 2.12 QTS. 2 L Genuine NISSAN Differential Oil Hypoid Super-CS GL-5, SAE 75W-90 or equivalent S
Engine Coolant Reservior 12.68 QTS. 11.99 L Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (Blue) or equivalent Approximate capacity. S
Engine Oil Drain and Refill,w/Filter 5.25 QTS. 4.96 L API - SAE 0W-20 SP If SAE 0W-20 motor oil (or engine oil) is not available, a synthetic SAE 0W-20 GF-6A SP motor oil (or engine oil) may be used. S
Engine Oil Drain and Refill,w/o Filter 5.00 QTS. 4.73 L API - SAE 0W-20 SP If SAE 0W-20 motor oil (or engine oil) is not available, a synthetic SAE 0W-20 GF-6A SP motor oil (or engine oil) may be used. S
Engine Oil Dry Engine 6.50 QTS. 6.15 L API - SAE 0W-20 SP If SAE 0W-20 motor oil (or engine oil) is not available, a synthetic SAE 0W-20 GF-6A SP motor oil (or engine oil) may be used. S
Fuel Tank 21.15 GALS. 80.06 L S
Power Steering Fluid 1.75 QTS. 1.65 L Genuine NISSAN PSF II or equivalent S
Transfer Case Fluid 1.60 QTS. 1.51 L Genuine NISSAN Automatic Transmission Fluid D3M S
Windshield Washer Fluid 5.00 QTS. 4.73 L Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.