Engine Control System (5 Of 6) DTCS

2024 Nissan-Datsun Frontier SL, RWDSECTION Engine Control System (5 Of 6) DTCS
DTC INDEX

DTC Description
P119C FUEL RAIL PRESSURE SENSOR
P1212 TCS COMMUNICATION LINE
P1217 ENGINE OVER TEMPERATURE
P1220 FUEL PUMP CONTROL MODULE (FPCM)
P1225 TP SENSOR
P1226 TP SENSOR
P1233 ELECTRIC THROTTLE CONTROL FUNCTION
P1234 TP SENSOR
P1235 TP SENSOR
P1236 THROTTLE CONTROL MOTOR
P1238 ELECTRIC THROTTLE CONTROL ACTUATOR
P1239 TP SENSOR
P1290 THROTTLE CONTROL MOTOR RELAY
P14C3 EXHAUST GAS TEMPERATURE SENSOR
P1550 BATTERY CURRENT SENSOR
P1551 BATTERY CURRENT SENSOR
P1552 BATTERY CURRENT SENSOR
P1553 BATTERY CURRENT SENSOR
P1554 BATTERY CURRENT SENSOR
P1556 BATTERY TEMPERATURE SENSOR
P1557 BATTERY TEMPERATURE SENSOR
P155D GENERATOR
P1564 ASCD STEERING SWITCH
P1564 ICC STEERING SWITCH
P1568 ICC COMMAND VALUE
P1572 BRAKE PEDAL POSITION SWITCH
P1575 BRAKE SWITCH
P159F ACTIVE GRILLE SHUTTER
P1603 ECM
P1650 STARTER MOTOR RELAY 2
P1651 STARTER MOTOR RELAY 2
P1655 ENGINE RESTART BYPASS RELAY
P1805 STOP LAMP SWITCH
P2004 INTAKE MANIFOLD RUNNER CONTROL VALVE
P2008 INTAKE MANIFOLD RUNNER CONTROL VALVE
P2014 INTAKE MANIFOLD RUNNER CONTROL VALVE POSITION SENSOR
P2016 INTAKE MANIFOLD RUNNER CONTROL VALVE POSITION SENSOR
P2017 INTAKE MANIFOLD RUNNER CONTROL VALVE POSITION SENSOR
P2018 INTAKE MANIFOLD RUNNER CONTROL VALVE POSITION SENSOR
P2081 EXHAUST GAS TEMPERATURE SENSOR
P2083 EXHAUST GAS TEMPERATURE SENSOR
P2096 A/F SENSOR 1
P2097 A/F SENSOR 1
P2098 A/F SENSOR 1
P2099 A/F SENSOR 1
P2100 THROTTLE CONTROL MOTOR RELAY
P2101 ELECTRIC THROTTLE CONTROL FUNCTION
P2103 THROTTLE CONTROL MOTOR RELAY
P2118 THROTTLE CONTROL MOTOR
P2119 ELECTRIC THROTTLE CONTROL ACTUATOR
P2122 APP SENSOR
P2123 APP SENSOR
P2127 APP SENSOR
P2128 APP SENSOR
P2132 TP SENSOR
P2133 TP SENSOR
P2135 TP SENSOR
P2138 APP SENSOR
P219A AIR FUEL RATIO
P219B AIR FUEL RATIO
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.