Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2016TITAN XD SL, 5.0L ENG VIN B, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASDRIVER ASSISTANCE SYSTEMECU DIAGNOSIS INFORMATIONADAS CONTROL UNITREFERENCE VALUEPHYSICAL VALUES
2016 Nissan-Datsun Titan XD SL, 5.0L Eng VIN B, 4WD
Physical Values
2016 Nissan-Datsun Titan XD SL, 5.0L Eng VIN B, 4WDSECTION Physical Values
| Terminal No. (Wire color) |
Description | Condition | Value (Approx.) |
|||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 1 (B) |
Ground | Ground | Input | - |
0 V | |
| 2 (L) |
ITS communication high | - | - |
- | ||
| 3 (G) |
Ignition power supply | Input | Ignition switch ON | Battery voltage | ||
| 4 (GR) |
Warning buzzer signal | Output | Ignition switch ON | Warning buzzer operation | Battery voltage | |
| Warning buzzer not operating | 0 V | |||||
| 5 (R) |
ITS communication low | - | - | - | ||
| 6 (R) |
CAN low | Input | - | - | ||
| 7 (GR) |
Warning system ON indicator | Output | Indicator | Illuminated | 0 - 0.1 V | |
| OFF | Battery voltage | |||||
| 9 (L) |
CAN high | - | - | - | ||
| 10 (P) |
CAN low | - | - | - | ||
| 11 (G) |
Sonar system OFF switch | Input | Sonar system OFF switch | Pressed | 0 - 0.1 V | |
| Released | Battery voltage | |||||
| 17 (BR) |
Sonar system OFF switch indicator | Output | Indicator | Illuminated | 0 - 0.1 V | |
| OFF | Battery voltage | |||||
| 18 (L) |
CAN high | Input | - | - | 0 V | |
| 23 (LG) |
Warning system switch | Input | Warning system switch | Pressed | 0 - 0.1 V | |
| Released | Battery voltage | |||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.