Work Procedure

2015 Nissan-Datsun Rogue SV, AWDSECTION Work Procedure

  1. RECORD REGISTRATION CODE FOR REPLACEMENT AV CONTROL UNIT

    1. Refer to the replacement AV control unit's label located on the top of the AV control unit.
      Fig 1: Locating AV Control Unit's Label On Top Of AV Control Unit
      G09461267Courtesy of NISSAN NORTH AMERICA, INC.
    2. Create a registration code to supply to NISSAN Owner Services by combining the last 9 digits of the NISSAN PART NO. (1) and the first 7 digits of the bar code number (2).
      Fig 2: Locating Nissan Part No. 1 And Bar Code Number
      G09461268Courtesy of NISSAN NORTH AMERICA, INC.
    3. Record the registration code.

    GO TO 2.Β 

  2. REGISTER REPLACEMENT AV CONTROL UNIT

    Register the replacement AV control unit by contacting NISSAN Owner Services. Refer to TSB.

    GO TO 3.Β 

  3. OPERATION CHECK

    Verify that the AV control unit "APPS" function operates normally.

    Work End.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.