Symptom Table

2015 Nissan-Datsun Rogue SV, AWDSECTION Symptom Table
Symptom Reference
None of the power windows can be operated using any switch. Refer to DIAGNOSIS PROCEDURE .
Driver side power window alone does not operate. Refer to DIAGNOSIS PROCEDURE .
Front passenger side power window does not operate (with both main power window and door lock/unlock switch and power window and door lock/unlock switch). Refer to DIAGNOSIS PROCEDURE .
Front passenger side power window does not operate (with front power window switch only). Refer to DIAGNOSIS PROCEDURE .
Rear LH side power window does not operate (with both main power window and door lock/unlock switch and rear power window switch LH). Refer to DIAGNOSIS PROCEDURE .
Rear LH side power window does not operate (with rear power window switch LH only). Refer to DIAGNOSIS PROCEDURE .
Rear RH side power window does not operate (with both main power window and door lock/unlock switch and rear power window switch RH). Refer to DIAGNOSIS PROCEDURE .
Rear RH side power window does not operate (with rear power window switch RH only). Refer to DIAGNOSIS PROCEDURE .
Anti-pinch system does not operate normally (drivers side). Refer to DIAGNOSIS PROCEDURE .
Power window retained power operation does not operate properly. Refer to DIAGNOSIS PROCEDURE .
Auto operation does not operate manual operate normally (driver side). Refer to DIAGNOSIS PROCEDURE .
Power window lock switch does not function. Refer to DIAGNOSIS PROCEDURE .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.