Exploded View With Torque Specifications

2015 Nissan-Datsun Micra SV, Standard TransSECTION Exploded View With Torque Specifications

DRIVER SEAT WITH LIFT 

GNSALJIA1238ZZ-238Courtesy of NISSAN NORTH AMERICA, INC.
1. Armrest 2. Seatback trim 3. Seatback pad
4. Seat cushion trim 5. Seat cushion pad 6. Seat cushion frame
7. Seat belt buckle 8. Seat cushion outer finisher (RH) 9. Seat cushion outer finisher (LH)
10. Lift lever 11. Lift lever finisher 12. Recline lever
13. Slide finisher rear (LH/RH) 14. Side air bag module 15. Chute rod
16. Headrest holder (locked) 17. Headrest holder (free) 18. Headrest
19. Seat frame        

DRIVER SEAT WITHOUT LIFT 

GNSALJIA1237ZZ-237Courtesy of NISSAN NORTH AMERICA, INC.
1. Seatback trim 2. Seatback pad 3. Seat cushion trim
4. Seat cushion pad 5. Seat cushion frame 6. Seat belt buckle
7. Seat cushion outer finisher (RH) 8. Seat frame 9. Seat cushion outer finisher (LH)
10. Recline lever 11. Slide finisher rear (LH/RH) 12. Side air bag module
13. Chute rod 14. Headrest holder (locked) 15. Headrest holder (free)
16. Headrest        

PASSENGER SEAT 

GNSAWJIA1438ZZ-438Courtesy of NISSAN NORTH AMERICA, INC.
1. Headrest 2. Headrest holder (locked) 3. Headrest holder (free)
4. Chute rod 5. Side air bag module 6. Slide finisher rear (LH/RH)
7. Recline lever 8. Seat cushion outer finisher (RH) 9. Seat frame
10. Occupant classification system sensors 11. Occupant classification system harness 12. Occupant classification system control unit
13. Seat cushion outer finisher (LH) 14. Seat belt buckle 15. Seat cushion pad
16. Seat cushion trim 17. Seatback pad 18. Seatback trim
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.