DTC Detection Logic

2015 Nissan-Datsun Juke SL, 4WDSECTION DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
NOTE:
  • If DTC P0462 or P0463 is displayed with DTC UXXXX, first perform the trouble diagnosis for DTC UXXXX.Β 
  • If DTC P0462 or P0463 is displayed with DTC P0607, first perform the trouble diagnosis for DTC P0607.Β Refer to Β DTC LOGICΒ Β .Β 

This diagnosis indicates the former, to detect open or short circuit malfunction.

DTC No. Trouble Diagnosis Name
(Trouble Diagnosis Content)
DTC Detecting Condition Possible Cause
P0462 FUEL LEVEL SEN/CIRC
(Fuel level sensor circuit low input)
An excessively low voltage from the sensor is sent to ECM.
  • Harness or connectors

    (CAN communication line is open or shorted)

  • Harness or connectors

    (Fuel level sensor circuit is open or shorted)

  • Combination meter
  • Fuel level sensor
P0463 FUEL LEVEL SEN/CIRC
(Fuel level sensor circuit high input)
An excessively high voltage from the sensor is sent to ECM.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.