SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2015JUKE SL, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 2 (ENGINE CONTROL SYSTEM (NISMO RS - DTC TESTS P1550-P2263 & CIRCUIT TESTS))DTC/CIRCUIT DIAGNOSISDTC P2138: APP SENSORDTC LOGICDTC DETECTION LOGIC
2015 Nissan-Datsun Juke SL, 4WD

DTC Detection Logic

2015 Nissan-Datsun Juke SL, 4WDSECTION DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
NOTE:

If DTC P2138 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to  DTC LOGIC  . 

DTC No. Trouble Diagnosis Name
(Trouble Diagnosis Content)		 DTC Detecting Condition Possible Cause
P2138 APP SENSOR
(Accelerator pedal position sensor circuit range/performance)		 Rationally incorrect voltage is sent to ECM compared with the signals from APP sensor 1 and APP sensor 2.
  • Harness or connector

    (APP sensor 1 or 2 circuit is open or shorted.)

    (Turbocharger boost sensor circuit is open or shorted.)

    (Fuel rail pressure sensor circuit is open or shorted.)

    (Battery current sensor circuit is open or shorted.)

    (G sensor circuit is open or shorted.)

    (Camshaft position sensor circuit is open or shorted.)

    (Exhaust valve timing control position sensor circuit is open or shorted.)

    (Engine oil pressure sensor circuit is open or shorted.)

  • Accelerator pedal position sensor

    (APP sensor 1 or 2)

  • Turbocharger boost sensor
  • Fuel rail pressure sensor
  • Battery current sensor
  • G sensor
  • Camshaft position sensor
  • Exhaust valve timing control position sensor
  • Engine oil pressure sensor
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.