SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2015JUKE SL, 4WDREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROL SYSTEM (EXCEPT NISMO RS - DTC TESTS P0138-P046E)DTC/CIRCUIT DIAGNOSISDTC P0404: EGR VOLUME CONTROL VALVEDTC LOGICDTC DETECTION LOGIC
2015 Nissan-Datsun Juke SL, 4WD

DTC Detection Logic

2015 Nissan-Datsun Juke SL, 4WDSECTION DTC Detection Logic
NOTE:

If DTC P0404 is displayed with DTC P044A, or P044E, first perform trouble diagnosis for DTC P044A, or P044E. Refer to DTC LOGIC .

DTC No. Trouble diagnosis name
(Trouble diagnosis content)		 DTC detecting condition Possible cause
P0404 EGR A CONTROL
(EGR A control circuit range/performance)
  • ECM detects that the current sent to the EGR volume control valve motor is equal to or more than the threshold value for 2 seconds or more under the condition that the target angle of EGR volume control valve is constant.
  • ECM detects that the difference between the target angle of EGR volume control valve and actual valve angle is equal to or more than the threshold value for 5 seconds or more.
  • EGR volume control valve
  • Foreigh objects interferes with EGR volume control valve
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.