SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2015JUKE SL, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSDOOR & LOCKSYMPTOM DIAGNOSISSELECTIVE UNLOCK FUNCTION DOES NOT OPERATEDIAGNOSIS PROCEDUREDIAGNOSTIC TEST
2015 Nissan-Datsun Juke SL, 4WD

Diagnostic Test

2015 Nissan-Datsun Juke SL, 4WDSECTION Diagnostic Test

  1. CHECK "DOOR LOCK-UNLOCK SET" SETTING IN "WORK SUPPORT"

    1. Select "DOOR LOCK" of "BCM" using CONSULT.
    2. Select "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT" mode.
    3. Check "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT"

      Refer to CONSULT FUNCTION (BCM - DOOR LOCK) .

    Is the inspection result normal?

    YES 

    GO TO STEP 2 

    NO 

    Set "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT".

  2. REPLACE BCM

    1. Replace BCM. Refer to REMOVAL AND INSTALLATION .
    2. Confirm the operation after replacement.

    Is the result normal?

    YES 

    INSPECTION END

    NO 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.