Work Support

2014 Nissan-Datsun NV3500 HD S, Van CargoSECTION Work Support
Work item Description Reference
TEMP SET CORRECT Setting change of temperature setting trimmer (front) can be performed. "TEMPERATURE SETTING TRIMMER (FRONT)Β "
BLOW SET Setting change of foot position setting trimmer can be performed. "FOOT POSITION SETTING TRIMMERΒ "
REC MEMORY SET Setting change of inlet port memory function (REC) can be performed. "INLET PORT MEMORY FUNCTION (REC)Β "
FRE MEMORY SET Setting change of inlet port memory function (FRE) can be performed. "INLET PORT MEMORY FUNCTION (FRE)Β "
NOTE: When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10V or less, the setting of WORK SUPPORT may be cancelled.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.