Component Function Check

2013 Nissan-Datsun Murano CrossCabrioletSECTION Component Function Check
  1. TIRE PRESSURE MONITORING SYSTEM OPERATION 

    With CONSULT

    1. Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes.
    2. On "DATA MONITOR", select "AIR PRESS FL", "AIR PRESS FR", "AIR PRESS RR" and "AIR PRESS RL", and check that the tire pressures match the standard value.
      Monitor item Condition Displayed value
      AIR PRESS FL Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes. Internal pressure of tires
      AIR PRESS FR
      AIR PRESS RR
      AIR PRESS RL
      CAUTION: Stop the vehicle and within 5 minutes, use CONSULT "DATA MONITOR" to display the tire pressure for all wheels.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Perform trouble diagnosis. Refer to "DIAGNOSIS PROCEDURE ".

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.