SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2013JUKE SL, 4WDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLBRAKE CONTROL SYSTEMDTC/CIRCUIT DIAGNOSISDTC C1105, C1106, C1107, C1108: WHEEL SENSORDTC LOGICDTC DETECTION LOGIC
2013 Nissan-Datsun Juke SL, 4WD

DTC Detection Logic

2013 Nissan-Datsun Juke SL, 4WDSECTION DTC Detection Logic
DTC Display Item Malfunction detected condition Possible causes
C1105 RR RH SENSOR-2
  • When a short circuit is detected in rear RH wheel sensor circuit.
  • When power supply voltage of rear RH wheel sensor is in following state.
    • Rear RH wheel sensor power supply voltage: 7.5 V ≥ Rear RH wheel sensor power supply voltage
    • Rear RH wheel sensor power supply voltage: 16 V ≤ Rear RH wheel sensor power supply voltage
  • When distance between rear RH wheel sensor and rear RH wheel sensor rotor is large.
  • When installation of rear RH wheel sensor or rear RH wheel sensor rotor is not normal.
  • Harness or connector
  • Wheel sensor
  • ABS actuator and electric unit (control unit)
  • Sensor rotor
  • Tire
C1106 RR LH SENSOR-2
  • When a short circuit is detected in rear LH wheel sensor circuit.
  • When power supply voltage of rear LH wheel sensor is in following state.
    • Rear LH wheel sensor power supply voltage: 7.5 V ≥ Rear LH wheel sensor power supply voltage
    • Rear LH wheel sensor power supply voltage: 16 V ≤ Rear LH wheel sensor power supply voltage
  • When distance between rear LH wheel sensor and rear LH wheel sensor rotor is large.
  • When installation of rear LH wheel sensor or rear LH wheel sensor rotor is not normal.
C1107 FR RH SENSOR-2
  • When a short circuit is detected in front RH wheel sensor circuit.
  • When power supply voltage of front RH wheel sensor is in following state.
    • Front RH wheel sensor power supply voltage: 7.5 V ≥ Front RH wheel sensor power supply voltage
    • Front RH wheel sensor power supply voltage: 16 V ≤ Front RH wheel sensor power supply voltage
  • When distance between front RH wheel sensor and front RH wheel sensor rotor is large.
  • When installation of front RH wheel sensor or front RH wheel sensor rotor is not normal.
C1108 FR LH SENSOR-2
  • When a short circuit is detected in front LH wheel sensor circuit.
  • When power supply voltage of front LH wheel sensor is in following state.
    • Front LH wheel sensor power supply voltage: 7.5 V ≥ Front LH wheel sensor power supply voltage
    • Front LH wheel sensor power supply voltage: 16 V ≤ Front LH wheel sensor power supply voltage
  • When distance between front LH wheel sensor and front LH wheel sensor rotor is large.
  • When installation of front LH wheel sensor or front LH wheel sensor rotor is not normal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.