Quick Lookups: Fluids

2013 Nissan-Datsun Juke SL, 4WDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.00 OZS. 0.14 L ND-11 S
Air Cond Refrigerant 0.90 LBS. 0.4 KG HFC-134a (R-134a) S
Automatic Transmission Fluid 4WD 9.13 QTS. 8.64 L Genuine NISSAN CVT Fluid NS-2 Use only Genuine NISSAN CVT Fluid NS-2. Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT, which is not covered by the NISSAN new vehicle limited warranty. S
Brake Fluid N/A N/A Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 S
Differential Gear Oil 0.88 QTS. 0.83 L Genuine NISSAN Differential Oil Hypoid Super GL-5, SAE 80W-90 or API - GL-5, SAE 80W-90 For hot climates, SAE 90 is suitable for ambient temperatures above 32Deg.F (0Deg.C). S
Engine Coolant Automatic CVT Trans w/Reservoir tank 8.63 QTS. 8.16 L Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (Blue) or equivalent S
Engine Coolant Reservior tank 0.63 QTS. 0.59 L Pre-diluted Genuine NISSAN Long Life Antifreeze/Coolant (Blue) or equivalent S
Engine Oil Drain and Refill,w/Filter 4.75 QTS. 4.49 L API - SAE 5W-30 S
Engine Oil Drain and Refill,w/o Filter 4.50 QTS. 4.25 L API - SAE 5W-30 S
Engine Oil Dry engine 5.75 QTS. 5.44 L API - SAE 5W-30 S
Fuel Tank 4WD 11.88 GALS. 44.97 L S
Manual Transmission Fluid 2.13 QTS. 2.01 L Genuine NISSAN gear oil 75W-80 or equivalent If Genuine NISSAN gear oil is not available, API GL-4, SAE 75W-80 maybe used as a temporary replacement. Replace with Genuine NISSAN gear oil as soon as it is available. S
Transfer Case Fluid 0.75 PTS. 0.35 L Genuine NISSAN Differential Oil Hypoid Super GL-5, SAE 80W-90 or API - GL-5, SAE 80W-90 S
Windshield Washer Fluid 4.75 QTS. 4.49 L Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.