SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2013JUKE S, FWDREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSPOWER WINDOW CONTROL SYSTEMSYSTEM DESCRIPTIONCOMPONENT PARTSCOMPONENT DESCRIPTION
2013 Nissan-Datsun Juke S, FWD

Component Description

2013 Nissan-Datsun Juke S, FWDSECTION Component Description
Component parts Description
BCM
  • Supplies power supply to power window switch.
  • Controls retained power.
Power window main switch
  • Directly controls all power window motor of all doors.
  • Controls anti-pinch operation of power window.
Front power window switch (passenger side) Controls power window motor of front passenger side door.
Rear power window switch (LH & RH) Controls power window motor of rear door (LH & RH).
Front power window motor (driver side)
  • Integrates the encoder and power window motor.
  • Operates with signals from power window main switch.
  • Transmits front power window motor (driver side) rotation as a pulse signal to power window main switch.
Front power window motor (passenger side) Operates with signals from power window main switch and front power window switch (passenger side).
Rear power window motor (LH & RH) Operates with signals from power window main switch and rear power window switch (LH & RH).
Encoder Detects condition of the front power window motor (driver side) operation and transmits to power window main switch as pulse signal.
Front door switch Detects door open/close condition and transmits to BCM.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.