SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2013JUKE S, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESTRACTION CONTROLBRAKE CONTROL SYSTEMSYSTEM DESCRIPTIONSYSTEMVDC FUNCTIONVDC FUNCTION: SYSTEM DESCRIPTIONOPERATION CHARACTERISTICS
2013 Nissan-Datsun Juke S, FWD

Operation Characteristics

2013 Nissan-Datsun Juke S, FWDSECTION Operation Characteristics

VDC Function That Prevents Oversteer Tendency

  • During a cornering, brake force (brake fluid pressure) is applied on front wheel and rear wheel on the outer side of turn. Moment directing towards the outer side of turn is generated. Oversteer is prevented.
    Fig 1: Overview Of VDC Function (Oversteer Tendency Prevented)
    G08707037Courtesy of NISSAN NORTH AMERICA, INC.
  • Changing driving lane on a slippery road, when oversteer tendency is judged large, engine output is controlled as well as brake force (brake fluid pressure) of 4 wheels. Oversteer tendency decreases.
    Fig 2: Overview Of VDC Function (Oversteer Tendency Decreases)
    G08707038Courtesy of NISSAN NORTH AMERICA, INC.

VDC Function That Prevents Understeer Tendency

  • During a cornering, brake force (brake fluid pressure) is applied on front wheel and rear wheel on the inner side of turn. Moment directing towards the inner side of turn is generated. Understeer is prevented.
    Fig 3: Overview Of VDC Function (Understeer Tendency Prevented)
    G08707039Courtesy of NISSAN NORTH AMERICA, INC.
  • Applying braking during a cornering on a slippery road, when understeer tendency is judged large, engine output is controlled as well as brake force (brake fluid pressure) of four wheels. Understeer tendency decreases.
    Fig 4: Overview Of VDC Function (Understeer Tendency Decreases)
    G08707040Courtesy of NISSAN NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.