SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2013JUKE NISMO, FWDREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMENGINE CONTROL SYSTEM - COMPONENT TESTING, PERIODIC MAINTENANCE AND REMOVAL AND INSTALLATIONFUEL INJECTORCOMPONENT FUNCTION CHECK
2013 Nissan-Datsun Juke Nismo, FWD

Component Function Check

2013 Nissan-Datsun Juke Nismo, FWDSECTION Component Function Check
  1. INSPECTION START 

    Turn ignition switch to START.

    Is any cylinder ignited? 

    YES: GO TO 2.

    NO: Proceed to "DIAGNOSIS PROCEDURE ".

  2. CHECK FUEL INJECTOR FUNCTION 

    With CONSULT

    1. Start engine.
    2. Perform "POWER BALANCE" in "ACTIVE TEST" mode of "ENGINE" using CONSULT.
    3. Check that each circuit produces a momentary engine speed drop.

    Without CONSULT

    1. Let engine idle.
    2. Listen to each fuel injector operating sound.

      Clicking noise should be heard. 

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Proceed to "DIAGNOSIS PROCEDURE ".

      Fig 1: Checking Fuel Injector Operating Sound
      G08690410Courtesy of NISSAN NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.