Component Function Check

2013 Nissan-Datsun Juke Nismo, FWDSECTION Component Function Check
  1. CHECK FUNCTION 
    1. Select "DOOR LOCK" of "BCM" using CONSULT.
    2. Select "DOOR SW-DR", "DOOR SW-AS", "DOOR SW-RL", "DOOR SW-RR", "DOOR SW-BK" in "DATA MONITOR" mode.
    3. Check that the function operates normally according to the following conditions.
      Monitor item Condition Status
      DOOR SW-DR Driver side door Open On
      Closed Off
      DOOR SW-AS Passenger side door Open On
      Closed Off
      DOOR SW-RL Rear door LH Open On
      Closed Off
      DOOR SW-RR Rear door RH Open On
      Closed Off
      DOOR SW-BK Back door Open On
      Closed Off

      Is the inspection result normal? 

      YES: Door switch is OK.

      NO: Refer to "DIAGNOSIS PROCEDURE ".

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.