Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Data Monitor
2012 Nissan-Datsun NV1500 SSECTION Data Monitor
| Item (Unit) | Data monitor item selection | Remarks | ||
|---|---|---|---|---|
| ECU INPUT SIGNALS | MAIN SIGNALS | SELECTION FROM MENU | ||
| FR LH SENSOR (km/h, mph) | x | x | x | Wheel speed (km/h, mph) calculated by front wheel sensor LH signal is displayed. |
| FR RH SENSOR (km/h, mph) | x | x | x | Wheel speed (km/h, mph) calculated by front wheel sensor RH signal is displayed. |
| RR LH SENSOR (km/h, mph) | x | x | x | Wheel speed (km/h, mph) calculated by rear wheel sensor LH signal is displayed. |
| RR RH SENSOR (km/h, mph) | x | x | x | Wheel speed (km/h, mph) calculated by rear wheel sensor RH signal is displayed. |
| DECEL G-SEN (G) | x | x | x | Longitudinal acceleration (G) detected by decel G-sensor is displayed. |
| FR RH IN SOL (On/Off) | - | x | x | Front RH IN ABS solenoid (On/Off) status is displayed. |
| FR RH OUT SOL (On/Off) | - | x | x | Front RH OUT ABS solenoid (On/Off) status is displayed. |
| FR LH IN SOL (On/Off) | - | x | x | Front LH IN ABS solenoid (On/Off) status is displayed. |
| FR LH OUT SOL (On/Off) | - | x | x | Front LH OUT ABS solenoid (On/Off) status is displayed. |
| RR RH IN SOL (On/Off) | - | x | x | Rear RH IN ABS solenoid (On/Off) status is displayed. |
| RR RH OUT SOL (On/Off) | - | x | x | Rear RH OUT ABS solenoid (On/Off) status is displayed. |
| RR LH IN SOL (On/Off) | - | x | x | Rear LH IN ABS solenoid (On/Off) status is displayed. |
| RR LH OUT SOL (On/Off) | - | x | x | Rear LH OUT ABS solenoid (On/Off) status is displayed. |
| EBD WARN LAMP (On/Off) | - | - | x | Brake warning lamp (On/Off) status is displayed. |
| STOP LAMP SW (On/Off) | x | x | x | Stop lamp switch (On/Off) status is displayed. |
| MOTOR RELAY (On/Off) | - | x | x | ABS motor relay signal (On/Off) status is displayed. |
| ACTUATOR RLY (On/Off) | - | x | x | ABS actuator relay signal (On/Off) status is displayed. |
| ABS WARN LAMP (On/Off) | - | x | x | ABS warning lamp (On/Off) status is displayed. |
| OFF LAMP (On/Off) | - | x | x | VDC OFF Lamp (On/Off) status is displayed. |
| OFF SW (On/Off) | x | x | x | VDC OFF switch (On/Off) status is displayed. |
| SLIP/VDC LAMP (On/Off) | - | x | x | SLIP indicator lamp (On/Off) status is displayed. |
| BATTERY VOLT (V) | x | x | x | Voltage (V) supplied to ABS actuator and electric unit (control unit) is displayed. |
| GEAR (1, 2, 3, 4, 5) | x | x | x | Gear position (1, 2, 3, 4, 5) judged by transmission range switch signal is displayed. |
| ENGINE SPEED (rpm) | x | x | x | Engine speed (rpm) judged by CAN communication signal is displayed. |
| YAW RATE SEN (d/s) | x | x | x | Yaw rate (d/s) detected by yaw rate sensor is displayed. |
| R POSI SIG (On/Off) | - | - | x | Reverse shift position (On/Off) judged by transmission range switch signal. |
| N POSI SIG (On/Off) | - | - | x | Shift position judged by transmission range switch signal. |
| CV1 (On/Off) | - | - | x | Front side switch-over solenoid valve (cut valve) (On/Off) status is displayed. |
| CV2 (On/Off) | - | - | x | Rear side switch-over solenoid valve (cut-valve) (On/Off) status is displayed. |
| SV1 (On/Off) | - | - | x | Front side switch-over solenoid valve (suction valve) (On/Off) status is displayed. |
| SV2 (On/Off) | - | - | x | Rear side switch-over solenoid valve (suction valve) (On/Off) status is displayed. |
| STOP LAMP SW2 (On/Off) | x | x | x | Stop lamp switch (On/Off) status is displayed. |
| ACCEL POS SIG (%) | x | - | x | Throttle valve open/close status judged by CAN communication signal is displayed. |
| SIDE G-SENSOR (m/s2 ) | x | - | x | Transverse acceleration detected by side G-sensor is displayed. |
| STR ANGLE SIG (deg) | x | - | x | Steering angle detected by steering angle sensor is displayed. |
| PRESS SENSOR (bar) | - | - | x | Brake pressure detected by pressure sensor is displayed. |
| ACCUM PRESS SEN (bar) | - | - | x | Accumulator pressure detected by accumulator pressure sensor is displayed. |
| EBD SIGNAL (On/Off) | - | - | x | EBD operation (On/Off) status is displayed. |
| ABS SIGNAL (On/Off) | - | - | x | ABS operation (On/Off) status is displayed. |
| TCS SIGNAL (On/Off) | - | - | x | TCS operation (On/Off) status is displayed. |
| VDC SIGNAL (On/Off) | - | - | x | VDC operation (On/Off) status is displayed. |
| EBD FAIL SIG (On/Off) | - | - | x | EBD fail signal (On/Off) status is displayed. |
| ABS FAIL SIG (On/Off) | - | - | x | ABS fail signal (On/Off) status is displayed. |
| TCS FAIL SIG (On/Off) | - | - | x | TCS fail signal (On/Off) status is displayed. |
| VDC FAIL SIG (On/Off) | - | - | x | VDC fail signal (On/Off) status is displayed. |
| CRANKING SIG (On/Off) | - | - | x | The input state of the key SW START position signal is displayed. |
| FLUID LEV SW (On/Off) | x | - | x | Brake fluid level switch (On/Off) status is displayed. |
| PARK BRAKE SW (On/Off) | - | - | x | Park brake switch (On/Off) status is displayed. |
| STP ON RLY (On/Off) | - | - | x | Stop lamp relay signal (On/Off) status is displayed. |
| x: Applicable -: Not applicable |
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.