Diagnosis Procedure (With LH and RH Anti-Pinch)

Regarding Wiring Diagram information, refer to "WIRING DIAGRAM - SEDAN WITH INTELLIGENT KEY SYSTEM ".

1. CHECK DOOR KEY CYLINDER SWITCH INPUT SIGNAL
   1. Turn ignition switch ON.
   2. Check voltage between main power window and door lock/unlock switch connector and ground.

      Terminals			Key position	Voltage (V) (Approx.)
      (+)		(-)
      Main power window and door lock/unlock switch connector	Terminal
      D7	4	Ground	Lock	0
      			Neutral / Unlock	5
      	6		Unlock	0
      			Neutral / Lock	5

      Fig 1: Checking Door Key Cylinder Switch Input Signal

      Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: Replace main power window and door lock/unlock switch. Refer to "REMOVAL AND INSTALLATION ".

      NO: GO TO 2

2. CHECK DOOR KEY CYLINDER SIGNAL CIRCUIT
   1. Turn ignition switch OFF.
   2. Disconnect main power window and door lock/unlock switch connector and front door lock assembly LH (key cylinder switch) connector.
   3. Check continuity between main power window and door lock/unlock switch connector and front door lock assembly LH (key cylinder switch) connector.

      Main power window and door lock/unlock switch connector	Terminal	Front door lock assembly LH (key cylinder switch) connector	Terminal	Continuity
      A: D7	4	B: D10	6	Yes
      	6		5

      Fig 2: Checking Door Key Cylinder Signal Circuit

      Courtesy of NISSAN NORTH AMERICA, INC.
   4. Check continuity between main power window and door lock/unlock switch connector and ground.

      Power window main switch connector	Terminal	Ground	Continuity
      A: D7	4		No
      	6

      Is the inspection result normal? 

      YES: GO TO 3

      NO: Repair or replace harness.

3. CHECK DOOR KEY CYLINDER SWITCH GROUND CIRCUIT

   Check continuity between front door lock assembly LH connector and ground.

   Front door lock assembly LH connector	Terminal	Ground	Continuity
   D10	4		Yes

   Fig 3: Checking Door Key Cylinder Switch Ground Circuit

   Courtesy of NISSAN NORTH AMERICA, INC.

   Is the inspection result normal? 

   YES: GO TO 4

   NO: Repair or replace harness.

4. CHECK DOOR KEY CYLINDER SWITCH

   Check door key cylinder switch.

   Refer to "COMPONENT INSPECTION ".

   Is the inspection result normal? 

   YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

   NO: Replace front door lock assembly LH (key cylinder switch). Refer to "FRONT DOOR LOCK: REMOVAL AND INSTALLATION ".