Component Function Check

2012 Nissan-Datsun 370Z Touring, 2D Convertible, Standard TransSECTION Component Function Check
  1. CHECK S-MODE SWITCH FUNCTION-I
    NOTE: If DTC UXXXX are displayed, first perform the trouble diagnosis for DTC UXXXX.
    1. Turn ignition switch ON.
    2. Select "M/T SYNCHRO SW" in "DATA MONITOR" mode with CONSULT.
    3. Check "M/T SYNCHRO SW" indication under the following conditions.
      Monitor item Condition Indication
      M/T SYNCHRO SW S-MODE switch Pressed ON
      Released OFF

      Is the inspection result normal? 

      YES: GO TO 2.

      NO: Go to "DIAGNOSIS PROCEDURE ".

  2. CHECK S-MODE SWITCH FUNCTION-II

    Check the S-MODE indicator under the following condition.

    Condition S-MODE indicator
    S-MODE switch Press (less than 1 second) Illuminated
    Press (1 second or more) Not illuminated

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Go to "DIAGNOSIS PROCEDURE ".

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.