SYS.OK|MANUAL.DB● LIVE
2009 Nissan-Datsun Xterra SE, 4WD

Quick Lookups: Fluids

2009 Nissan-Datsun Xterra SE, 4WDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 6.00 OZS. 0.17 L PAG 46 S
Air Cond Refrigerant 1.56 LBS. 0.7 KG R-134a S
Automatic Transmission Fluid 10.88 QTS. 10.29 L Genuine NISSAN Automatic Transmission Fluid Matic S If Genuine NISSAN Matic S ATF is not available, Genuine NISSAN Matic J ATF may also be used. Using ATF other than Genuine NISSAN Matic S ATF or Matic J ATF will cause deterioration in drive ability and Automatic Transmission durability, and may damage the Automatic Transmission. S
Brake Fluid N/A N/A Genuine NIssan Heavy Duty DOT 3 Brake Fluid S
Differential Gear Oil Front 0.90 QTS. 0.85 L Differential Oil Hypoid Super API - GL-5, SAE 80W-90 For hot climates, SAE 90 is suitable for ambient temperatures above 32Deg.F (0Deg.C). S
Differential Gear Oil Rear,C200 Axle 1.70 QTS. 1.6 L API - GL-5, SAE 75W-90 Synthetic Gear Oil S
Differential Gear Oil Rear,M226 Axle 2.11 QTS. 1.99 L API - GL-5, SAE 75W-90 Synthetic Gear Oil S
Engine Coolant 10.75 QTS. 10.17 L 50/50 mixture of Genuine NISSAN Long Life Antifreeze/Coolant and demineralized or distilled water S
Engine Oil Drain and Refill,w/Filter 5.40 QTS. 5.11 L API - SAE 5W-30 S
Engine Oil Drain and Refill,w/o Filter 5.10 QTS. 4.82 L API - SAE 5W-30 S
Fuel Tank 21.15 GALS. 80.06 L S
Manual Transmission Fluid 4WD 4.45 QTS. 4.21 L Genuine NISSAN Manual Transmission Fluid (MTF) HQ Multi, SAE 75W-85 or API - GL-4, SAE 75W-85 or 75W-90 S
Power Steering Fluid 1.05 QTS. 0.99 L Genuine NISSAN Power Steering Fluid or equivalent S
Transfer Case Fluid 2.11 QTS. 1.99 L Genuine NISSAN Automatic Transmission Fluid Matic D S
Windshield Washer Fluid 4.75 QTS. 4.49 L Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.