Cancel Operation

2009 Nissan-Datsun Xterra SE, 4WDSECTION Cancel Operation

When any of following conditions exist, cruise operation will be canceled.

  • CANCEL switch is pressed
  • More than 2 switches on ASCD steering switch are pressed at the same time (Set speed will be cleared)
  • Brake pedal is depressed
  • Clutch pedal is depressed or gear position is changed to the neutral position (M/T models)
  • Selector lever position is changed to N, P or R (A/T models)
  • Vehicle speed decreased to 13 km/h (8 MPH) lower than the set speed
  • VDC system is operated

When the ECM detects any of the following conditions, the ECM will cancel the cruise operation and inform the driver by blinking indicator lamp.

  • Engine coolant temperature is slightly higher than the normal operating temperature, CRUISE lamp may blink slowly.

    When the engine coolant temperature decreases to the normal operating temperature, CRUISE lamp will stop blinking and the cruise operation will be able to work by depressing SET/COAST switch or RESUME/ACCELERATE switch.

  • Malfunction for some self-diagnoses regarding ASCD control: SET lamp will blink quickly.

If MAIN switch is turned to OFF while ASCD is activated, all of ASCD operations will be canceled and vehicle speed memory will be erased.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.