Engine Coolant Temperature Sensor

2004 Nissan-Datsun Altima S, AutomaticSECTION Engine Coolant Temperature Sensor
  1. Check resistance between engine coolant temperature sensor terminals 1 and 2 as shown in the figure.
    Fig 1: Checking Engine Coolant Temperature Sensor
    G02884297Courtesy of NISSAN MOTOR CO., U.S.A.

    < Reference data > 

    REFERENCE DATA

    Engine coolant temperature °C (°F) Voltage(1) V Resistance kΩ
    -10 (14) 4.4 7.0 - 11.4
    20 (68) 3.5 2.1 - 2.9
    50 (122) 2.2 0.68 - 1.00
    90 (194) 0.9 0.236 - 0.260
    (1) These data are reference values and are measured between ECM terminal 73 (Engine coolant temperature sensor) and ground.
    Fig 2: Identifying Resistance & Temperature Graph
    G02884298Courtesy of NISSAN MOTOR CO., U.S.A.
  2. If NG, replace engine coolant temperature sensor.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.