SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2003FRONTIER BASE, STANDARDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLBRAKE CONTROL SYSTEMVDC/TCS/ABSTROUBLE DIAGNOSISCONSULT-II FUNCTIONSDATA MONITOROPERATION PROCEDURE
2003 Nissan-Datsun Frontier Base, Standard

Operation Procedure

2003 Nissan-Datsun Frontier Base, StandardSECTION Operation Procedure
  1. Turn ignition switch OFF.
  2. Connect CONSULT-II to data link connector.
    3. Fig 1: Identifying Data Link Connector
    G02104483Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch ON.
  4. Touch "START" on display.
  5. Touch "ABS" on display.
    Fig 2: Identifying CONSULT-II Display Screen - ABS
    G02104484Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "DATA MONITOR".
    Fig 3: Identifying CONSULT-II Display Screen - DATA MONITOR
    G02104485Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Return to monitor item selection screen and touch any of "ECU INPUT SIGNALS", "MAIN SIGNALS", "CAN DIAG SUPPORT MNTR" or "SELECTION FROM MENU". Refer to "DISPLAY ITEM LIST ".
    8. Fig 4: Identifying CONSULT-II Display Screen - Display Item List
    G02104486Courtesy of NISSAN MOTOR CO., U.S.A.
  8. Touch "START".
  9. Screen of data monitor is displayed.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.