SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2003FRONTIER 2WD L4-2.4L (KA24DE)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESGENERIC SCAN TOOL (GST)
2003 Nissan-Datsun Frontier 2WD L4-2.4L (KA24DE)

Generic Scan Tool (GST)

2003 Nissan-Datsun Frontier 2WD L4-2.4L (KA24DE)SECTION Generic Scan Tool (GST)



DESCRIPTION
Generic Scan Tool (OBDII scan tool) complying with SAE J1978 has 7 different functions explained.

ISO9141 is used as the protocol.

The name GST or Generic Scan Tool is used.

Function Part 1:




Function Part 2:






GST INSPECTION PROCEDURE




1. Turn ignition switch OFF.
2. Connect "GST" to data link connector which is located under LH dash panel near the fuse box cover.
3. Turn ignition switch ON.




4. Enter the program according to instruction on the screen or in the operation manual.
(*: Regarding GST screens in this section, sample screens are shown.)




5. Perform each diagnostic mode according to each service procedure.
For further information, see the GST Operation Manual of the tool maker.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.