SYS.OK|MANUAL.DB● LIVE
2001 Nissan-Datsun Sentra SE, Standard, RS5F70A

Quick Lookups: Fluids

2001 Nissan-Datsun Sentra SE, Standard, RS5F70ASECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 6.00 OZS. 0.17 L PAG 100 S
Air Cond Refrigerant 1.21 LBS. 0.54 KG R-134a S
Automatic Transmission Fluid 6.60 QTS. 6.24 L Automatic Transmission Fluid DEXRON II or DEXRON III S
Brake Fluid N/A N/A Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 S
Engine Coolant 2.0L Eng,Standard Trans w/Reservoir tank 7.15 QTS. 6.76 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water S
Engine Oil 2.0L Eng Drain and Refill,w/Filter 3.50 QTS. 3.31 L API - SAE 5W-30 API - SAE 5W-30 viscosity oil is preferred for all temperatures. SAE 10W-30 or SAE 10W-40 viscosity oils may be used if the ambient temperature is above 0Deg.F (-18Deg.C). S
Engine Oil 2.0L Eng Drain and Refill,w/o Filter 3.25 QTS. 3.07 L API - SAE 5W-30 API - SAE 5W-30 viscosity oil is preferred for all temperatures. SAE 10W-30 or SAE 10W-40 viscosity oils may be used if the ambient temperature is above 0Deg.F (-18Deg.C). S
Fuel Tank 13.25 GALS. 50.15 L S
Manual Transmission Fluid 2.0L Eng 3.80 QTS. 3.59 L Genuine NISSAN Manual Transmission Fluid (MTF) HQ Multi, SAE 75W-85 or API - GL-4, SAE 75W-85 S
Power Steering Fluid N/A N/A Genuine NISSAN Power Steering Fluid II or equivalent S
Windshield Washer Fluid 3.70 QTS. 3.5 L Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.