Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2017MIRAGE G4 ES, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEIGNITION SYSTEMENGINE OVERHAULGENERAL SPECIFICATIONS
2017 Mitsubishi Mirage G4 ES, Automatic CVT Trans
General Specifications
2017 Mitsubishi Mirage G4 ES, Automatic CVT TransSECTION General Specifications
| Item | 3A92 | |
|---|---|---|
| Total displacement cm3 (cu in) | 1, 193 (72.8) | |
| Bore x stroke mm (in) | 75.0 (2.95) x 90.0 (3.54) | |
| Compression ratio | 10.5 | |
| Combustion chamber | Pentroof type | |
| Camshaft arrangement | DOHC | |
| Valve timing | Intake opening | BTDC 41° - ATDC 9 ° |
| Intake closing | ABDC 19° - ABDC 69° | |
| Exhaust opening | BBDC 35° | |
| Exhaust closing | ATDC 5° | |
| Fuel system | Electronically controlled multiport fuel injection | |
| Ignition system | Electronic-controlled 3-coil | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.