SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2017MIRAGE G4 ES, AUTOMATIC CVT TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROL SYSTEMSSPECIAL TOOLS
2017 Mitsubishi Mirage G4 ES, Automatic CVT Trans

Special Tools

2017 Mitsubishi Mirage G4 ES, Automatic CVT TransSECTION Special Tools
Tool Tool number and name Supersession Application
G09628470
  1. MB992744
  2. MB992745
  3. MB992746
  4. MB992747
  5. MB992748
  1. Vehicle communication interface-Lite (V.C.I.-Lite)
  2. V.C.I.-Lite main harness A (for vehicles with CAN communication)
  3. V.C.I.-Lite main harness B (for vehicles without CAN communication)
  4. V.C.I.-Lite USB cable short
  5. V.C.I.-Lite USB cable long
 -
CAUTION: V.C.I.-Lite main harness A (MB992745) should be used. V.C.I.-Lite main harness B (MB992746) not be used for this vehicle.
Checking diagnostic trouble code (DTC)
G06244449
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826 M.U.T.-III sub assembly
  1. Vehicle Communication Interface (V.C.I.)
  2. M.U.T.-III USB Cable
  3. M.U.T.-III Main Harness A (Vehicles with CAN communication system)
  4. M.U.T.-III Main Harness B (Vehicles without CAN communication system)
  5. M.U.T.-III Main Harness C (for Chrysler models only)
  6. M.U.T.-III Measurement Adapter
  7. M.U.T.-III Trigger Harness
 MB991824-KIT
NOTE: g: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
CAUTION: M.U.T.-III main harness A (MB991910) should be used. M.U.T.-III main harness B and C (MB991911 and MB991914) should not be used for this vehicle.
Checking diagnostic trouble code (DTC)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.