Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2012OUTLANDER ESREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSDOOR SYSTEMON-VEHICLE SERVICECUSTOMIZATION FUNCTION
2012 Mitsubishi Outlander ES
Customization Function
2012 Mitsubishi Outlander ESSECTION Customization Function
Using the ETACS system of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
CUSTOMIZATION FUNCTION REFERENCE CHART
| Adjustment item (scan tool MB991958 M.U.T.-III display) | Adjustment item | Adjusting contents (scan tool MB991958 display) | Adjusting contents |
|---|---|---|---|
| Door unlock mode | Adjustment of power door locks with selective unlocking | All doors unlock | Without function: The first operation of keyless entry system or unlock operation by KOS unlocks all doors. |
| Dr door unlock | With function: The first operation of keyless entry system or unlock operation by KOS unlocks the driver's door only, and the second unlock operation within 2 seconds after that unlocks all doors. (initial condition) | ||
| Auto door unlock | Adjustment of the auto door unlock function | Disabled | Without function (initial condition). |
| Always (P pos) | With function: Operates when the shift lever or the selector lever is moved to the P position. | ||
| Always (Lock pos) | With function: Operates when the ignition switch is moved to the LOCK (OFF) position. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.