Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2012OUTLANDER ESREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSMITSUBISHI MULTI-COMMUNICATION SYSTEM (MMCS)DIAGNOSISERROR MESSAGE
2012 Mitsubishi Outlander ES
Error Message
2012 Mitsubishi Outlander ESSECTION Error Message
When the multivision display detects its own unintentional operation or malfunction in the loaded disc, it displays the following error messages.
ERROR MESSAGE REFERENCE CHART
| Error messages | Error contents | Cause | Action |
|---|---|---|---|
| The unit is too hot. Please wait... | Malfunction of HDD by high temperature | The temperature of HDD inside the multivision display is 201°F (94°C) or more. | Wait until the temperature drops to the operable temperature. After the temperature drops, the error message display is terminated, and then returns to the screen before the error message display. |
| The unit is too cold. Please wait... | Malfunction of HDD by low temperature | The temperature of HDD inside the multivision display is -4°F(-20°C) or less. | Wait until the temperature rises to the operable temperature by working the air conditioning. After the temperature rises, the error message display is terminated, and the screen returns to the status before displaying the error message. |
| It is difficult to read the hard disc. Wait for a while until the hard disk is restored. | Malfunction of HDD by vibration | Severe vibration is applied to the multivision display, and the reading of the HDD data is prohibited. | When the multivision display confirms the HDD data reading availability, it restarts automatically. Check if the multivision display is securely installed to the vehicle body. |
| HDD Partition Error | System malfunction occurs to the HDD inside the multivision display. | The multivision display checks HDD automatically. "Restart" is displayed after the completion of the check. Select "Restart" to restart the multivision display. If it does not restart, turn the ignition switch to the OFF position to turn off the power supply, and then turn the ignition switch to the ON position to restart. After the restart, check that the OK is displayed for the HDD Drive in the "Network/Connect Line Check" of the MMCS service mode. If not, replace the multivision display. | |
| Please check the disc. | Disk type error | The specification of the disk used has a problem. | The disk used may have a problem. Check the disk for scratches or dirt. Also, perform the INSPECTION PROCEDURE 8 "CD/DVD CANNOT BE PLAYED" of the troubleshooting. |
| Play is impossible due to a focus error. Please eject the disc. | Focus error | The disk used has scratches and dirt, and the data cannot be read. | |
| Play is impossible. Please eject the disc. | Disk error | The data of the disk used has a malfunction, and the data cannot be read. | |
| Seek error | |||
| Servo startup error | |||
| TOC read error | |||
| DVD-Video Disk info error (Disk information cannot be read.) | |||
| Play is impossible due to a Mechanism error. | Power-on error | The DVD drive inside the multivision display has a malfunction. | Perform the INSPECTION PROCEDURE 8 "CD/DVD CANNOT BE PLAYED" of the troubleshooting. |
| Pickup operation error | |||
| Mecha stack error | |||
| Loading/eject error | |||
| The region code is incorrect. Please eject the disc. | DVD-Video region code error | The region code of the DVD does not match the specification of the multivision display. | Replace with the DVD that matches the specification of the multivision display. |
| Please eject the disc. The monitor panel is too hot. Screen display has stopped to protect the liquid crystal panel. Wait until the monitor panel has cooled down. | Monitor high temperature error | The temperature of the monitor is 203°F (95°C) or more for 60 seconds or more. | The monitor turns OFF 5 seconds after the error message appears. Wait until the temperature of the monitor drops. The temperature drops, and then the multivision display returns automatically. |
NOTE:
"Environment" is not displayed on the "INFO" screen. Ambient temperature is not displayed on the environment screen. If atmospheric pressure or altitude is not displayed on the environment display, the CAN box unit may have a problem in the CAN communication with A/C-ECU or engine-ECU. Check if a diagnosis code is set in the CAN box unit.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.