Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2012LANCER RALLIARTREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSDOOR SYSTEM - LANCERON-VEHICLE SERVICECENTRAL DOOR LOCKING SYSTEM CHECK
2012 Mitsubishi Lancer Ralliart
Central Door Locking System Check
2012 Mitsubishi Lancer RalliartSECTION Central Door Locking System Check
- Check that the central door locking system works by operating the door lock switch. If it does not operate, perform troubleshooting. Refer to TROUBLESHOOTING STRATEGY
.NOTE: When the inside lock knob is operated with the driver's door opened, the driver's door is not locked.
- Check whether the driver's door is opened when the driver's door inside handle is pulled with all the doors locked. If it does not operate, replace the driver's door latch assembly. Refer to DOOR HANDLE AND LATCH .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.