Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2007OUTLANDER LS, FWDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSDIAGNOSIS & ON-VEHICLE TESTINGGENERAL INFORMATIONCOMPONENTS AND FUNCTIONS
2007 Mitsubishi Outlander LS, FWD
Components And Functions
2007 Mitsubishi Outlander LS, FWDSECTION Components And Functions
COMPONENTS AND FUNCTIONS
| Parts name | Function |
|---|---|
| Low clutch | Works with 1st, 2nd, 3rd, and 4th gears, and transfers the input from 3-5 reverse clutch drum to the front internal gear. |
| 3-5 reverse clutch | Works with 3rd, 5th, and reverse gears, and transfers the reduction internal gear input to the front sun gear. |
| High clutch | Works with 4th, 5th, and 6th gears, and transfers the input shaft input to the rear carrier. |
| Low and reverse brake | Works with 4th, 5th, and 6th gears, and transfers the input shaft input to the rear carrier. |
| 2-6 brake | Works with 2nd and 6th, and fixes the rear sun gear rotation. |
| One-way clutch | Works when in 1st gear under acceleration status, and fixes the rear carrier. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.