Curtain Air Bag Module

2007 Mitsubishi Outlander LS, FWDSECTION Curtain Air Bag Module
  1. Check that the curtain air bag deployment part of the headlining is normal.
  2. Check the inflator surface for cracks, dents or deformations.
  3. Check the connector for damage, the terminal for deformation, and the harness for binding.
    Fig 1: Identifying Curtain Air Bag Module Deployment Section
    G04873280Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.