General Data And Specifications: CANADA

2007 Mitsubishi Outlander LS, FWDSECTION CANADA
Fig 1: Identifying Vehicle Length Dimension (Canada)
G04869466Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
GENERAL DATA AND SPECIFICATIONS CHART

Item CW6W
XLSYL3M XLSYZL3M XLXYL3M XLXYZL3M
Vehicle dimension mm (in) Overall length 1 4,640 (182.7) 4,640 (182.7) 4,640 (182.7) 4,640 (182.7)
Overall width 2 1,800 (70.9) 1,800 (70.9) 1,800 (70.9) 1,800 (70.9)
Overall height (unladen) 3 1,680 (66.1)< Vehicles without roof rail > 1,720 (67.7)< Vehicles with roof rail > 1,720 (67.7)< Vehicles with roof rail > 1,680 (66.1)< Vehicles without roof rail > 1,720 (67.7)< Vehicles with roof rail > 1,720 (67.7)< Vehicles with roof rail >
Wheelbase 4 2,670 (105.1) 2,670 (105.1) 2,670 (105.1) 2,670 (105.1)
Tread-front 5 1,540 (60.6) 1,540 (60.6) 1,540 (60.6) 1,540 (60.6)
Tread-rear 6 1,540 (60.6) 1,540 (60.6) 1,540 (60.6) 1,540 (60.6)
Overhang-front 7 965 (38.0) 965 (38.0) 965 (38.0) 965 (38.0)
Overhang-rear 8 1,005 (39.6) 1,005 (39.6) 1,005 (39.6) 1,005 (39.6)
Ground clearance 9 215 (8.5) 215 (8.5) 215 (8.5) 215 (8.5)
Vehicle weight kg (lb) Curb weight 1,615 (3,560) 1,680 (3,703) 1,670 (3,681) 1,735 (3,825)
Gross vehicle weight rating 2,300 (5,071) 2,350 (5,181) 2,300 (5,071) 2,350 (5,181)
Gross axle weight rating-front 1,090 (2,403)
Gross axle weight rating-rear 1,100 (2,425)
Seating capacity 5 7
Engine Model No. 6B31
Piston displacement 3.0 L
Transaxle Model No. F6AJA W6AJA F6AJA W6AJA
Type 6-speed automatic
Fuel system Fuel supply system Multiport fuel injection
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.