Monitor Check

2007 Mitsubishi Outlander LS, FWDSECTION Monitor Check
  1. Select "Monitor Check" on "Service" screen.
    Fig 1: Navigation System "Service" Display Screen
    G04874026Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Eight color bars will be displayed.
    Fig 2: Navigation System "Eight Color Bars" Display Screen
    G04874031Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. When "Enter" is pressed on the navigation unit joystick while the eight color bars are shown, gray scale will be displayed with a 16-step gradation.
    Fig 3: Navigation System "Gray Scale" Display Screen
    G04874032Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. When "Enter" is pressed while the gray scale is shown with a 16-step gradation, a crosshatch pattern will be displayed (Each cell should be square).
    Fig 4: Navigation System "Crosshatch Pattern" Display Screen
    G04874033Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. When "Enter" is pressed on the navigation unit joystick while the crosshatch pattern is shown, the screen will turn white.
    Fig 5: Navigation System "White" Display Screen
    G04874034Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  6. When "Enter" is pressed on the navigation unit joystick while the screen is white, it will turn black.
    Fig 6: Navigation System "Black" Display Screen
    G04874035Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  7. When "Enter" is pressed on the navigation unit joystick while the screen is black, the screen will turn red.
    Fig 7: Navigation System "Red" Display Screen
    G04874036Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  8. When "Enter" is pressed on the navigation unit joystick while the screen is red, it will turn green.
    Fig 8: Navigation System "Green" Display Screen
    G04874037Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  9. When "Enter" is pressed on the navigation unit joystick while the screen is green, it will turn blue.
  10. When "Enter" is pressed on the navigation unit joystick while the screen is green, it will return to the "Service" screen.
    Fig 9: Navigation System "Blue" Display Screen
    G04874038Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.