Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2007OUTLANDER LS, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALBODY ELECTRICALCHASSIS ELECTRICALALARM SYSTEMON-VEHICLE SERVICECONFIGURATION FUNCTION
2007 Mitsubishi Outlander LS, FWD
Configuration Function
2007 Mitsubishi Outlander LS, FWDSECTION Configuration Function
Use scan tool MB991958 to adjust the following functions. The programmed information is held even when the battery is disconnected.
SCAN TOOL OPERATION REFERENCE
| Adjustment item (scan tool display) | Adjustment item | Adjustment contents (scan tool display) | Adjusting contents |
|---|---|---|---|
| Alarm | With/without theft alarm function | Disable | Without function |
| Enable | With function (default) | ||
| Duration of prealarm | Adjustment of pre alarm continue time | 10 sec | 10 seconds (default) |
| 6 sec | 6 seconds | ||
| Panic alarm switch | With/without panic alarm function | Disable | Without function |
| Enable | With function (default) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.