Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Mitsubishi Lancer AutomaticFACTORY OEM SERVICE PROCEDURE
Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE |
|---|---|
| Output shaft preload mm (in) | 0.01 - 0.09 (0.0004 - 0.0035) |
| Brake reaction plate end play mm (in) | 0 - 0.16 (0-0.0063) |
| Low-reverse brake end play mm (in) < F4A4B-1 > | 1.35 - 1.81 (0.0531 - 0.0713) |
| Low-reverse brake end play mm (in) < F4A4B-4 > | 1.65 - 2.11 (0.0649 - 0.0831) |
| Second brake end play mm (in) | 0.79 - 1.25 (0.0311 - 0.0492) |
| Underdrive sun gear end play mm (in) | 0.25 - 0.45 (0.0098 - 0.0177) |
| Input shaft end play mm (in) | 0.70 - 1.45 (0.028 - 0.057) |
| Differential case preload mm (in) | 0.045 - 0.105 (0.0018 - 0.0041) |
| Underdrive clutch end play mm (in) | 1.6 - 1.8 (0.063 - 0.070) |
| Reverse and overdrive clutch return spring retainer end play mm (in) | 0 - 0.09 (0 - 0.003) |
| Overdrive clutch end play mm (in) | 1.6 - 1.8 (0.063 - 0.070) |
| Reverse clutch end play mm (in) | 1.5 - 1.7 (0.060 - 0.066) |
| Backlash between differential side gear and pinion mm (in) | 0.025 - 0.150 (0.0010 - 0.0059) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
