Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2007ENDEAVOR SE, FWDREPAIR AND DIAGNOSISENGINE MECHANICALCOOLING SYSTEM (MECHANICAL)SPECIFICATIONSSERVICE SPECIFICATION
2007 Mitsubishi Endeavor SE, FWD
Service Specification
2007 Mitsubishi Endeavor SE, FWDSECTION Service Specification
SERVICE SPECIFICATION
| ITEM | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Fan control module | Condenser fan motor connector voltage V |
|
1 or less | - |
|
Repeat 8.2 +/- 2.6 and Battery positive voltage +/- 2.6 | - | ||
| Fan control module connector voltage V |
|
Battery positive voltage | - | |
| High-pressure valve opening pressure of radiator cap kPa (psi) | 93 - 123 (14 - 18) | Minimum 83 (12) | ||
| Thermostat | Valve opening temperature of thermostat °C (°F) | 88 +/- 1.5 (190 +/- 3) | - | |
| Full-opening temperature of thermostat °C (°F) | 100 (212) | - | ||
| Valve lift mm (in) | 9.0 (0.35) or more | - | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.