Jam Preventing Mechanism

2007 Mitsubishi Endeavor SE, FWDSECTION Jam Preventing Mechanism
TESTING JAM PREVENTING MECHANISM OPERATION

NO. SUNROOF FUNCTION REQUIREMENTS FOR THE SUNROOF TO FUNCTION NORMAL OPERATION
01 CLOSE
  1. Ignition switch: ON
  2. Sunroof switch: CLOSE/TILT-DOWN
  3. Sunroof initial position: being closed or opened
  4. If there is an object in the sunroof opening, interrupt the sunroof operation before the sunroof is fully closed.
After the sunroof operation is interrupted, it opens to the predetermined distance and then stops automatically.
02 TILT-DOWN
  1. Ignition switch: ON
  2. Sunroof switch: CLOSE/TILT-DOWN
  3. Sunroof initial position: being tilting down
  4. Interrupt the sunroof operation before the sunroof is fully close.
The sunroof tilts up automatically after it is interrupted.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.