Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2007ENDEAVOR SE, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXTRACTION CONTROL SYSTEM (TCL) DTCS
2007 Mitsubishi Endeavor SE, FWD
Traction Control System (TCL) DTCS
2007 Mitsubishi Endeavor SE, FWDSECTION Traction Control System (TCL) DTCS
TRACTION CONTROL SYSTEM (TCL) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description |
|---|---|
| C1200 | Front right wheel speed sensor |
| C1201 | Front right wheel speed sensor |
| C1205 | Front left wheel speed sensor |
| C1206 | Front left wheel speed sensor |
| C1210 | Rear right wheel speed sensor |
| C1211 | Rear right wheel speed sensor |
| C1215 | Rear left wheel speed sensor |
| C1216 | Rear left wheel speed sensor |
| C1226 | ABS front right solenoid inlet valve |
| C1231 | ABS front right solenoid outlet valve |
| C1236 | ABS front left solenoid valve inlet valve |
| C1241 | ABS front left solenoid valve outlet valve |
| C1246 | ABS rear right solenoid valve inlet valve |
| C1251 | ABS rear right solenoid valve outlet valve |
| C1256 | ABS rear left solenoid valve inlet valve |
| C1261 | ABS rear left solenoid valve outlet valve |
| C1266 | ABS hydraulic unit motor stuck |
| C1273 | ABS hydraulic unit motor drive circuit stuck off |
| C1274 | ABS hydraulic unit motor drive circuit stuck on |
| C1278 | ABS solenoid valve power circuit stuck off |
| C1279 | ABS solenoid valve power circuit stuck on |
| C1395 | Brake fluid filling not completed |
| C1396 | Engine torque intervention refusal |
| C1397 | Transmission range switch input refusal |
| C1607 | ABS/TCL-ECU failure |
| C1860 | ABS/TCL-ECU power supply |
| C1861 | ABS/TCL-ECU power supply |
| U1073 | CAN communications system bus off |
| U1100 | CAN communications system time out error engine related data |
| U1101 | CAN communications system time out error A/T related data |
| U1120 | CAN communications system TCL uncontrollable by engine malfunction |
| U1400 | Dynamic range error APS1 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.