Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2007ENDEAVOR SE, FWDREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESTRACTION CONTROLTRACTION CONTROL/ACTIVE SKID CONTROL SYSTEMTCL/ASC DIAGNOSISDATA LIST REFERENCE TABLE
2007 Mitsubishi Endeavor SE, FWD
Data List Reference Table
2007 Mitsubishi Endeavor SE, FWDSECTION Data List Reference Table
The following items can be read by the scan tool from the TCL/ASC-ECU input data.
DATA LIST REFERENCE
| M.U.T.-III SCAN TOOL DISPLAY | ITEM NO. | CHECK ITEM | CHECKING REQUIREMENTS | NORMAL VALUE |
|---|---|---|---|---|
| FR wheel ABS drive | 01 | Front-right ABS sensor | Drive the vehicle | Vehicle speeds displayed on the speedometer and scan tool are identical. |
| FL wheel ABS drive | 02 | Front-left ABS sensor | ||
| RR wheel ABS drive | 03 | Rear-right ABS sensor | ||
| RL wheel ABS drive | 04 | Rear-left ABS sensor | ||
| Battery voltage | 05 | ABS-ECU power supply voltage | Ignition switch power supply voltage and valve monitor voltage | Battery positive voltage |
| Stoplight switch | 06 | Stoplight switch | Depress the brake pedal. | ON |
| Release the brake pedal. | OFF | |||
| Straight G sensor | 30 | Straight G | -9.8 - 9.8 m/s2 | |
| Lateral G sensor | 31 | Lateral G | -9.8 - 9.8 m/s2 | |
| Steering angle | 32 | Steering angle | -900 - 900 deg | |
| Yaw rate sensor | 33 | Yaw rate | -50 - 50 deg/s | |
| Master cylinder pressure | 34 | Master cylinder pressure | The value fluctuates significantly as the brake pedal is depressed. | 0 - 5 V |
| TCL mode | 35 | TCL mode | TCL OFF switch: ON | OFF |
| TCL OFF switch: OFF | ON | |||
| Brake indicator lamp | 36 | Brake warning light | Depress the brake pedal. | ON |
| Release the brake pedal. | OFF | |||
| ASC disable state | 37 | Whether the ASC control is possible or not | Possible | Enable |
| Impossible | disable | |||
| Sum of ASC disable state | 38 | Number of times the ASC control is impossible | 0 - 255 | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.