Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2001MIRAGE LS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCKSELF-DIAGNOSTIC SYSTEMRETRIEVING DIAGNOSTIC TROUBLE CODESUSING SCAN TOOL
2001 Mitsubishi Mirage LS, 4D Sedan, Standard
Using Scan Tool
2001 Mitsubishi Mirage LS, 4D Sedan, StandardSECTION Using Scan Tool
- With ignition switch off, connect MUT II (MB991502) or compatible scan tool and appropriate ROM pack to data link connector located under driver side of dash. See Fig 1 .
- Turn ignition switch to RUN position. ANTI-LOCK warning light should come on as ABS goes into self-diagnostic mode. Read and record all diagnostic output DTCs from ECU memory. Refer to scan tool manufacturer's instructions for specific DTC retrieval procedure.
- After all DTCs have been retrieved and recorded, clear DTCs from ECU memory. Refer to scan tool manufacturer's instructions for specific DTC clearing instructions. See appropriate DTCS table.
- If DTCs cannot be cleared, ECU is currently detecting a malfunction. If DTCs can be cleared, problem is either intermittent or only appears while driving.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.