Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2000GALANT LS V6-3.0L SOHCREPAIR AND DIAGNOSISSTEERING AND SUSPENSIONSTEERINGSTEERING COLUMNSERVICE AND REPAIRREMOVAL AND REPLACEMENT
2000 Mitsubishi Galant LS V6-3.0L SOHC
Removal and Replacement
2000 Mitsubishi Galant LS V6-3.0L SOHCSECTION Removal and Replacement
REMOVAL AND INSTALLATION
WARNING:
- Before removing the air bag module, refer to Service Precautions and Air Bag Module and Clock Spring.
- When removing and installing the steering wheel, do not let it bump against the air bag module.
Removal Service Point
[A]Steering Wheel Removal
CAUTION: Do not hammer on the steering wheel to remove it; doing so will damage the collapsible mechanism.
Use special tool MB990803 to remove the steering wheel.
WARNING:
- Before removing the air bag module, refer to Service Precautions and Air Bag Module and Clock Spring.
- When removing and installing the steering wheel, do not let it bump against the air bag module.
Removal Service Point
[A]Steering Wheel Removal
CAUTION: Do not hammer on the steering wheel to remove it; doing so will damage the collapsible mechanism.
Use special tool MB990803 to remove the steering wheel.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.